PSU4 – Power Supply 16V AC (DCC) – 12V DC

£18.00

The Block Signalling PSU4 is the big brother of the PSU1, this module is great if you require more 12v DC accessory points to operate on your layout.

This module can also be linked to a second PSU4 if required to provide even more power supply flexibility.

Description

The Block Signalling PSU4 is the big brother of the PSU1, this module is great if you require more 12v DC accessory points to operate on your layout.

This module can also be linked to a second PSU4 if required to provide even more power supply flexibility.

The BLOCK Signalling PSU4 module provides 12 stable 12V DC power supplies where only a single AC or DC power supply is available.

The input automatically adjusts for all power inputs in the range of 5V to 25V DC or 9V to 24V AC and produces a number of stable 12V DC outputs.

The input can be wired to the input terminals, or if you are using a plug-top power supply this can be plugged into the 2.1mm jack.  The module is not sensitive to the polarity of the input.

The 12V DC outputs are protected by a 1A self-resetting fuse, so in the event of a short circuit or overload the power will be cut and then automatically reconnected after the fault has been cleared and the fuse has had time to cool.

For further detailed information on this module, including installation instructions, connection information, and troubleshooting tips, please download the latest instructions 122AF1A.pdf If you require copies of previous instructions for older versions of this module please visit the Documentation section at the bottom of this page.

Reviews

There are no reviews yet.

Be the first to review “PSU4 – Power Supply 16V AC (DCC) – 12V DC”

Your email address will not be published.

You may also like…