SEC4A-DCC – Section Control Module

£40.00

The Perfect operational companion to our Eckon or Berko colour light signals, this Block Signalling module is an upgrade on the ASP1, ASP1-NS & SEC1A-DC modules.

The SEC4A-DCC adds full DCC compatibility to the function list of the SEC1A-DC, with realistic breaking to a stop at a signal as well as keeping lights and sound operational while at a stop (depending on DCC system settings).

Description

The Perfect operational companion to our Eckon or Berko colour light signals, this Block Signalling module is an upgrade on the ASP1, ASP1-NS & SEC1A-DC modules.

The SEC4A-DCC adds full DCC compatibility to the function list of the SEC1A-DC, with realistic breaking to a stop at a signal as well as keeping lights and sound operational while at a stop (depending on DCC system settings).

The BLOCK signalling Section Control Module is designed for DCC layouts, to protect a section of track to prevent more than one train entering that section at one time.

  • Monitors trains entering and leaving a section of track
  • Automatically sets the signal at the start of the section to danger (red)
  • Switches a section of track from DCC to DC, so DCC equipped locos automatically decelerate to a standstill in front of the signal at danger
  • Communicates to previous sections to ensure they show yellow (and double yellow) aspects when 3- and 4-aspect signals are used
  • Last section can simulate returning back to green using timers to provide realistic operation when 3- and 4-aspect signals are used
  • Points which are not set in the trains favour can force the signal to danger and switch the isolating section to DC
  • Signal can be forced to danger by an external input (useful for starter signals)
  • Suitable for 2-, 3-, and 4-aspect led signals (SEC4A-DCC for common-cathode and SEC4B-DCC for common-anode signals)
  • Bidirectional running mode with 2-aspect signalling at each end of the line
  • New: Additional Station Stop Modes
  • New: Additional Dapol output
  • Remembers whether the section is occupied after the power is removed and automatically restores the signals after power returns
  • Simple to setup, but also fully configurable to provide the most realistic operation
  • Requires a 12V DC Power Supply

For further detailed information on this module, including installation instructions, connection information, and troubleshooting tips, please download the latest instructions 44KF1X.pdf  If you require copies of previous instructions for older versions of this module please visit the Documentation section at the bottom of this page.

Reviews

There are no reviews yet.

Be the first to review “SEC4A-DCC – Section Control Module”

Your email address will not be published. Required fields are marked *

Captcha loading…

You may also like…